SizeGeneticsデバイスの左アームの組み立て方法

Proper assembly of your SizeGenetics penile traction device is crucial for both effectiveness and comfort. The left arm, in particular, needs to be aligned correctly to ensure even tension and prevent discomfort during use.

In this guide, we'll walk you through the steps to assemble the left arm, from attaching the basal ring to securing the cradle component. We'll also share some tips on how to ensure a snug fit and avoid common mistakes.

Understanding the Components

Before you begin, it's important to identify the parts you'll need for the left arm assembly. The left arm consists of several key components: the basal ring, the complete assembled arm (for the left side), and the cradle component that holds the glans in place.

For most users, the left arm is assembled similarly to the right, but it's essential to use the correct side-specific parts. The 'Complete assembled arm right' is for the right side, so ensure you have the left-appropriate components for your device. If you're unsure, refer to your device's manual or contact customer support.

• Check that all parts are present: basal ring, arm assembly, cradle, and screws.
• Clean the components before assembly to ensure smooth operation.

Step-by-Step Assembly Process

Start by attaching the basal ring to the base of the device. The basal ring should be positioned so that the left arm attachment point is on the left side. Secure it with the appropriate screws, such as the 'Basal ring bolt right' if you're using that type of fastener, but ensure it's for the left side.

Next, attach the left arm to the basal ring. Align the arm's connector with the ring's slot and push until it clicks into place. Use the 'Handscrew right' or the correct left-side screw to tighten the connection, but be careful not to overtighten, as this can strip the threads.

Finally, attach the cradle component to the arm. The cradle should be oriented to hold the glans comfortably. If you have a 'Sensitive glans kit', you can use the included cushioning for added comfort. Ensure the cradle is securely fastened before adjusting the tension.

• Use the 'No-slip protect' to add grip and prevent slippage during use.
• If you need extra cushioning, consider the '4-pack protection pad' for added comfort.

Tips for Proper Alignment and Comfort

Once assembled, check that the left arm is aligned symmetrically with the right arm. Misalignment can cause uneven tension, leading to discomfort or reduced effectiveness. Adjust the arm length to match the right side, and ensure the cradle is centered.

For enhanced comfort, consider using a 'Silicone tube transparent' over the cradle to reduce friction. Additionally, the 'Rubber strap black' can be used to secure the device more comfortably. Always start with low tension and gradually increase as your body adapts.

• Regularly check the tightness of all screws to prevent loosening during use.
• If you experience discomfort, try the 'Accellerate tuneup combo' for a more customized fit.

Assembling the left arm of your SizeGenetics device is straightforward if you follow these steps. Proper assembly ensures optimal performance and comfort, allowing you to focus on your traction therapy. If you encounter any issues, refer to your device's manual or consult customer support.