How to Use a Penile Traction Device for Peyronie's Disease: A Step-by-Step Routine

Quick answer

Start with a low-tension session of 30 minutes, using proper wrapping to protect the glans, then gradually increase wear time and tension over weeks. Consistency matters more than intensity, so aim for 2–3 hours daily in shorter sessions. Always listen to your body—pain means you're overdoing it.

Peyronie's disease causes a fibrous plaque that can bend the penis, making erections painful and intercourse difficult. Traction therapy is one of the few non-surgical options that may help straighten the curvature over time. The idea is simple: gentle, sustained stretching encourages tissue remodeling and can reduce the bend.

But using a traction device correctly is not intuitive. Too much tension too soon can cause injury, while too little or inconsistent use won't produce results. This guide walks you through a safe, step-by-step routine—from preparation to daily wear—so you can get the most from your device without common mistakes.

Start with the Right Setup

Before you even put the device on, check that you have all the necessary parts: a basal ring, a comfortable front piece, and a tension system (springs or bars). If you're new, consider a complete kit like the GT kit black, which includes straps, elongation bars, and protection pads—everything you need to begin.

Wash your hands and the device parts with a mild cleanser. The Accellerate Clean spray is designed to keep your extender free of bacteria and ready for use. A clean device reduces the risk of skin irritation.

Make sure the basal ring size is correct. It should fit snugly behind the glans but not cause deep grooves. If it's too tight, you'll get marks and discomfort; if it's loose, the device may slip off.

• Use a mirror the first few times to ensure proper placement of the basal ring and front piece.

Apply Protection and Positioning

The skin on the glans is sensitive, and direct pressure from the device can cause soreness. Wrap the glans with a cohesive gauze or use a protection pad. The Sensitive Glans Kit includes cohesive gauze, a protection pad, and talcum powder—all designed to keep the area comfortable and secure during traction.

Dust a small amount of powder on the skin to reduce friction and keep it dry. Then position the basal ring behind the glans and attach the device frame. Adjust the tension rods so that you feel a gentle stretch but no sharp pain.

A common mistake is pulling too hard right away. Start with minimal tension—just enough to feel a slight pull. The goal is to encourage tissue adaptation, not to force a stretch.

• Use the cohesive gauze for extra cushioning if you have sensitive skin.

Gradually Build Tolerance

If you're new to traction, don't try to wear the device for hours on day one. Begin with 30-minute sessions, twice a day. After a week, increase to 45 minutes per session. By week three, you should be able to do three 1-hour sessions daily.

Your skin and tissues need time to adapt. Watch for numbness, discoloration, or sharp pain—all signs that you need to reduce tension or take a break. A mild, constant stretch is the target; if you feel like you're being pinched, adjust the fit or take a rest day.

It's also important to remove the device every 60–90 minutes to check your skin and restore blood flow. This is normal and part of a safe routine.

• Set a timer—don't rely on your memory for session lengths.

Maintain Consistency and Monitor Progress

Traction therapy works slowly. Most guidelines suggest usage for several hours a day for at least three months before seeing improvements. Consistency is more important than doing a few super-long sessions once a week.

Take a photo or note your curvature angle every two to four weeks. If you're not seeing changes after a couple of months, you may need to increase tension or wear time—but only by small steps. Also, keep the device clean and replace worn parts regularly, such as the basal ring, to ensure even tension.

If you experience any unusual pain, or if the curvature worsens, stop and consult a urologist. Traction is a complement to medical treatment, not a replacement.

• Keep a simple log of days worn, hours per session, and pain level—it helps you track progress.

Your step-by-step Peyronie's traction routine

1. Prepare and clean: Wash the device parts with Accellerate Clean or mild soap and water. Make sure the basal ring is clean and dry. Checkpoint: A clean device prevents skin irritation and keeps parts functioning smoothly.
2. Protect the glans: Wrap the glans with cohesive gauze or use a protection pad. Optionally apply a small amount of talcum powder to reduce friction. Checkpoint: If you see marks or feel soreness, increase padding or reduce tension.
3. Position the device: Place the basal ring behind the glans and attach the frame. Adjust the elongation bars or tension screws to set a low tension level—just enough to feel a stretch. Checkpoint: You should be able to fit one finger between the device and your skin; if not, loosen it.
4. Wear in short sessions: Start with 30 minutes twice daily. After a week, extend to 45 minutes, and by week three you can do three 1-hour sessions. Checkpoint: Never exceed 90 minutes without a 10-minute break to restore circulation.
5. Monitor and adjust: Every 2–4 weeks, note your curvature and check for any skin issues. If no changes after two months, increase tension slightly or add an extra session. Checkpoint: If you feel sharp pain or numbness, reduce tension and consult your doctor if symptoms persist.

Parts and accessories that support your routine

• GT kit black: Includes 3 black rubber straps for secure and adjustable tension, 1 set of 1/2 inch elongation bars, and 3 protection pads. This all-in-one kit gives you the basics—straps for tension, bars for length adjustment, and pads for comfort—so you don't have to piece together parts separately.
• Sensitive glans kit: Includes 1 Accellerate Traction Talcum Powder, 1 Cohesive Gauze, and 1 Protection Pad to help support comfort and secure positioning. If your glans is prone to irritation, this kit provides the cushioning and friction prevention that can make longer sessions more comfortable.
• Elongation bar 1in/2,5cm (set of 2): This set includes two 1-inch (2.5 cm) elongation bars, designed as medium-sized replacement or spare bars for your traction device. Compatible with Sizegenetics traction devices. As you progress and your tolerance increases, adding a longer bar allows you to increase stretch length without straining the device or your skin.

Using a penile traction device for Peyronie's disease requires patience and proper technique. Start slow, protect sensitive skin, and stay consistent. Over weeks and months, you may see a reduction in curvature. If you have any doubt or the condition changes, talk to a urologist. The right routine—and the right accessories—can make the process safer and more comfortable.